Looking For Fabrication Services? Here Are 4 Reasons Why You Should Try Water Jet Cutting

When it comes to fabrication services, there are many different ways to design and cut your materials. Common among them are CNC punching, laser cutting, and plasma cutting. When most people think about fabrication, they think about these options. However, there is another option that you probably have been overlooking all along. That option is water jet cutting. Water jet cutting is in the same league as other major alternatives such as laser cutting, if not better. And here is why you should try it. It’s very safe for the environment Most cutting fabrication alternatives in the market are thermal…
Read more →

Features To Look For In Protective Coatings

There is a wide assortment of materials that are used in the processing and manufacturing industry. When the various products have been created, they will require protective coating so as to ensure their finish stays intact and does not acquire undue superficial damage. This is where protective coatings come in. Typically, protective coatings will be referred to according to the resin used in creating them. Some of the most popular resins include alkyd, acrylic, epoxy, and polyurethane. It should be noted that two similar resins that come from two different manufacturers would have varying properties. This is because the other…
Read more →

Welding Helmets For Motorcycle Frame Repair: 2 Important Facts

An intact metal frame is essential for safety as you cruise around in your motorcycle. This is why broken components of the frame need to be welded back without further delay. If you choose to do this on your own, you’ll need to protect your eyes from the potentially damaging effects of exposure to the weld arc. Remember the two facts discussed below as you plan the DIY welding activity. Your Motorcycle Helmet Is Not A Suitable Substitute You probably chose not to hire a professional welder in order to cut down on expenditure. However, using your motorcycle helmet instead…
Read more →

Laser Cutting For Metal Fabrication: Why?

Cutting of metals during fabrication is often unavoidable. There are various techniques that a metal fabrication specialist can use to can cut their raw material into rightly-sized pieces or sheets. Laser cutting is among the techniques referred to and it often costs more than to have metals laser-cut. This article compares laser cutting to other cutting techniques in a bid to justify the often higher cost of this technique. Trainee fabricators should find this information particularly useful Laser Cutting vs Conventional Machining Conventional machining refers to the use of traditional-style machines to cut metals during fabrication. Lathes, drill presses and…
Read more →

1 2